Brakes and Clutches in Burton upon Trent
How do Ford vehicle brakes work?
Brakes are the reverse vehicle system to clutches, because they reduce the forward momentum of a car.
Two types of brakes are found on cars - parking brakes and service brakes.
Parking brakes are used when a car has stopped or is parked, and the foot brake slows your car when driving on the road.
To apply service brakes, the driver pushes the pedal towards the floor which is found in the middle on the driver's side.
This causes the brake calliper pistons to press against the brake disc on the wheel and the friction slows the vehicle, by changing the kinetic energy propelling the car into heat that passes into air around the wheels.
If your brakes aren't functioning properly, contact a garage in Burton upon Trent as soon as possible.
Manual transmission cars and clutches
Clutches are only present on manual vehicles. Changing gears is enabled when the pedal, situated on the far left in the driver's foot well, has been pressed.
A cable or hydraulic connection running from the clutch pedal straight to the mechanism of the clutch which disengages the clasped plate facings by pushing the clutch foot pedal, enabling you to choose alternative gears with the gear knob. If clutch pedals are released before gears are fully engaged, a juddering will be experienced, which can cause clutch damage.
Smooth releasing of the clutch after switching gears is required to ensure a comfortable journey. For clutch concerns, contact a Burton upon Trent garage.
Car braking problems
Vehicle faults can happen with any car parts, but if you're worried your brakes might have a fault, it is important to seek advice as soon as possible from a reliable Burton upon Trent garage.
Many maintenance jobs can be carried out on Mitsubishi brakes, such as brake pad replacement so brake disc damage isn't inflicted by chafing and rubbing, to checking for leaks in pipes and hoses and servicing Servos.
Hydraulic, air and vacuum brake systems require regular pressure checks in addition to checking and topping up reservoirs when needed.
