Timing Belts in Chester
The results of failing to act on timing belt issues
A failure to spot that your cam belt is damaged, or worse still; a failure to address the issue can have disastrous consequences for your car engine.
Should you Alfa romeo vehicle have an interference engine not replacing a broken timing belt can result in damage to your car.
If the cam belt snaps then your car will simply stop, but if the belt continues to work whilst it is damaged your engine could be damaged beyond repair without your knowledge.
If your timing belt is damaged the pistons and valves in your engine will knock together which can result in cracks forming in your valve guides.
Your valve guides may also become bent which can result in considerable expense to fix.
In extreme circumstances your cam shaft may even break.
Should you be having any difficulties with your cam belt utilise RepairACar to find a timing belt specialist in Chester.
Jobs that Chester mechanics do on timing belts
Should you need to have cam belt work done you will need to find a mechanic firm in Chester. Visiting RepairACar will help you to find Chester mechanics to undertake work on your vehicle's cam belt. All manner of cam belt work can be undertaken by our mechanics in Chester.
When you think that your timing belt may be damaged you can have them check your timing belt. If a problem with your cam belt is present our timing belt mechanics in Chester can carry out repairs, or if this is not a possibility, they can run through a replacement of your cam belt. It might be that you need to have your timing belt tightened, or it could be that you need to have it loosened as it is running too tightly.
It could be that you need to have a realigning of your cam belt. Maybe your crankshaft and cam belt need to be synchronised, or it could be that you wish to have your cam belt and water pump replaced together, no matter what you requirements RepairACar can be called upon to find Chester timing belt specialists.
Types of timing belt
Cam belts can be procured in a number of types and the sort that you will need will depend on the type of car it is that you own. There are two sorts of car engines that require a cam belt. Cam belts for interference engines need to be regularly maintained as a result of the close proximity between the pistons and valves in your engine.
Timing bets for non-interference engines need a lot less maintaining as the pistons and valves are spaced further apart. There are also timing belts with varying shaped teeth. Older cam belts will have triangular shaped teeth, whereas timing belts with rounded teeth are found in more modern vehicle.
Cam belts are normally made from rubber which has been strengthened by other materials like Twaron or Kevlar, although HSN tends to be used in more recently made cam belts.
Cam belt problems
Issues with the timing belt of your car are one of the main reasons for car's breaking down. Cam belts can suffer a number of problems and you can avoid breaking down if you know how to spot them.
The timing belt snapping all together is obviously the main concern, and there are a range of problems that can cause this. Timing belts can get over tight leading to them becoming noisy, and making creaking sounds.
Should the teeth fall out of your timing belt the cam shaft cannot be turned. The camshaft will also not be able to turn if the cam belt is aligned incorrectly.
Cam belts can be damaged as a result of oil exposure changing the size of the belt, stopping it from properly functioning. A vehicles timing belt will sometimes get loose with them ending up slid out of position.
Cam belts are sometimes known to snap after becoming corroded.
Definition of a cam belt
A timing belt connects a vehicle's crankshaft and camshaft. It has teeth that vary in shape dependant on your belt's type.
Timing belts that are recent tend to have round teeth, whereas sharp teeth tend to imbue older belts. Timing belts are normally made from rubber and are then covered with materials like twaron to make them stronger to ensure that they are able to last longer.
Some timing belts are made out of resistant materials such as HSN to prevent damage as a result of exposure to high temperatures. Modern cam belts are not as wide as there predecessors in order to lessen their weight, to generate less friction.
Why do engines have timing belts?
Cam belts can be found within the engine of your car that are able to control the timing of valves in engines. The engine valves need to open and close a set number of times and this is regulated by the cam belt. A timing belt's teeth are purposefully designed with regards to the sort of engine that the belt is part of.
These teeth will turn the cam shaft of the vehicle's engine ad keep it in sync with the crankshaft. The camshaft turns at half the speed as the crankshaft of the engine, enabled by the timing belt. If this is stopped for any reason, then the engine will not function correctly which will surely result in severe damage to your engine.
Causes of such damage to engines can be valves in the vehicle's engine staying open at the wrong times resulting in them being blocked by the pistons of the engine.
