Timing Belts in Dunfermline
Different sorts of timing belt
Timing belts can be obtained in a range of types and the sort that you will need will depend on your particular vehicle. A cam belt will be applied in two types of engine.
Timing bets for interference engines need to be rigorously maintained due to the closeness between the engine's valves and pistons. Cam belts for non-interference engines do not need such a high level of maintenance as the pistons and valves do not lie so close together.
The teeth of your cam belt may be of a number of shapes. Triangular toothed timing belts tend to be older, when contrasted with the rounded teeth of recent cam belts.
Cam belts are normally made from rubber which has been strengthened with materials such as Twaron, although HSN tends to be used in more recently made cam belts.
What is a timing belt?
A timing belt is a belt that connects the crank and camshaft of a vehicle's engine. It has teeth running it's length that vary in shape depending on you vehicles belt type. Timing belts that are new will have rounded teeth, whereas shaper teeth can be found on older belts.
Timing belts are normally made from rubber and will then be covered with materials like fibreglass so that they are stronger to make sure that they last longer. Modern timing belts are made out of highly resistant materials like HSN to prevent damage as a result of exposure to high temperatures. Recently made cam belts are manufactured much thinner so as to decrease weight and friction subsequently.
Issues that may develop with your timing belt
Issues with the timing belt of your car are one of the main reasons for a vehicle suffering a breakdown.
Timing belts can be hit with a number of issues and spotting them early on can prevent serious trouble.
The timing belt snapping all together is obviously the main concern, but there are a number of things that can cause this to happen.
Timing belts can become over stretched which will lead to them emitting loud squeaking noises.
Should your cam belt start to loose teeth there will be no way to turn the cam shaft.
Another thing that stops camshafts turning are timing belts becoming misaligned.
Cam belts can be damaged as a result of oil exposure changing the size of the belt, stopping it from properly functioning.
Timing belts will sometimes come loose which can in turn lead to them slipping out of position.
Cam belt corrosion can also result in them snapping.
Timing belt jobs for Dunfermline mechanics
If you need to have work done on your timing belt Dunfermline mechanics will need to be located.
Visiting RepairACar will help you to find Dunfermline mechanics to perform work on your vehicle's timing belt.
Our Dunfermline mechanics can perform all manner of cam belt jobs.
When you think that your timing belt may be damaged they are able to check your timing belt.
If your cam belt is in fact damaged it can be repaired by our timing belt experts in Dunfermline, or should this not be possible, they can replace your damaged cam belt.
It might be that you need to have your timing belt tightened, or your cam belt may be too tight.
You cam belt may need to be realigned.
Perhaps you need to have your cam belt and crankshaft synchronised, or you might have to have both your timing belt and water pump replaced at the same time, no matter what the job you can utilise RepairACar to find a registered Dunfermline timing belt specialist.
The results of failing to act on timing belt issues
Failure to recognise the signs of a damaged timing belt, or worse still; a failure to address the issue can have disastrous consequences for your car engine. If you have an interference engine in your vehicle failure to replace a cam belt that is damage will almost certainly damage your car. If the timing belt in your car breaks then the vehicle will not even start up, but should it be running whilst it is damaged your engine could be damaged beyond repair without your knowledge.
If you have a damaged timing belt the valves and pistons in your car's engine will hit into one another which can cause cracks in the valve guides. You could also end up with bend valve guides which can cost a considerable amount to have fixed. You might even end up suffering from a broken camshaft in extreme cases.
If you are experiencing any problems with cam belts RepairACar can be utilised to source you a cam belt specialist in Dunfermline.
What does a cam belt do?
Cam belts can be found within the engine of your car that control an engine valve's timing.
Valves in engines need to open and close a pre-agreed number of times and the cam belt makes sure that this happens in order.
The teeth on a cam belt are specifically designed so that they can deliver maximum efficiency for their engine.
These teeth will turn the cam shaft of the vehicle's engine and ensure that it does not drop out of sync with the crankshaft.
The cam shaft turns half as fast as the engine's crankshaft, and the cam belt ensures this happens.
Should something stop this from happening then the engine will be prevented from efficiently working which can lead to your engine suffering irreparable damage.
Causes of such engine damage can include your engine's valves remaining open when they shouldn't be leading to them become stuck by the pistons.
