Failure to recognise when a timing belt is damaged, or even worse; a failure to do anything when it is can spell disaster for your engine. If your vehicle has an interference engine failure to replace a cam belt that is damage will almost certainly damage your car. Should your timing belt snap your vehicle will not run at all, but if your cam belt is running whilst damaged it could be causing significant damage without your knowledge.
Should your cam belt become damaged the pistons and valves in your engine will collide potentially causing your valve guides to become cracked. You could suffer bent valve guides which is also a costly procedure to fix. In extreme cases your camshaft may even break.
Should your timing belt be damaged utilise RepairACar to find a timing belt specialist in Blean.
Timing belts can be obtained in a range of types and the type that you will need will be dependant on your particular vehicle.
A cam belt will be applied in two types of engine.
Interference engine cam belts require careful maintenance because of the proximity between the pistons and valves in your vehicles engine.
Cam belts for non-interference engines do not need such a high level of maintenance as the pistons and valves do not lie so close together.
The teeth of your cam belt may be of a number of shapes.
Older cam belts will have triangular shaped teeth, whereas modern timing belts will normally have rounded teeth.
Timing belts tend to be made from rubber which has been strengthened by other materials like Twaron or Kevlar, although manufacturers tend to make use of materials such as HSN nowadays.
If you need to have work done on your timing belt you will have to source a Blean mechanic.
RepairACar can be used to source registered Blean mechanics to perform work on your vehicle's timing belt.
Our Blean mechanics can perform all manner of cam belt jobs.
If you think that you have a damaged timing belt you can have them check your timing belt.
If your cam belt is in fact damaged it can be repaired by our timing belt experts in Blean, or if this is not possible undertake a timing belt replacement.
You may need to have your timing belt tightened, or it may even need to be loosened as it is too tight.
You cam belt may need to be realigned.
Perhaps you need to have your cam belt and crankshaft synchronised, or your timing belt and vehicle water pump replaced simultaneously, RepairACar can be used to help you find timing belt experts in Blean irrespective of your problem.
Timing belts are found within your vehicle's engine that regulate the timing of engine valves in vehicles. The engine valves need to open and close a set number of times and a cam belt is responsible for this happening. The teeth of a timing belt are attentively designed so that they can deliver maximum efficiency for their engine.
These teeth turn the cam shaft of the engine and make sure that it stays synchronised with the crankshaft. The camshaft turns at half the speed as the engine's crankshaft, and the cam belt ensures this happens. Should this be prevented from happening the engine will not run properly which will lead to serious engine damage.
Causes of such engine damage can include engine valves not opening and closing correctly leading to them sticking to the pistons.
Issues with the timing belt of your car are one of the leading causes of breakdowns.
You can experience difficulty with timing belts for a number of reasons and significant damage can be avoided if you can identify them sooner or later.
Having your cam belt snap is the worst possible problem, but there are other issues that can lead to this happening.
Cam belts can become over stretched leading to them becoming noisy, and making creaking sounds.
If your timing belt looses its teeth it will pose serious problems as there is no way to turn the cam shaft.
The camshaft will also be stopped from turning if the timing belt is not aligned properly.
Timing belts can also suffer oil damage changing the size of the belt, stopping it from properly functioning.
A vehicles timing belt will sometimes get loose which can in turn lead to them slipping out of position.
Cam belt corrosion can also result in them snapping.
A cab belt is a belt that offers a connection between the crankshaft of an engine and its camshaft.
It is covered with teeth that vary in shape dependant on your belt's type.
Round teeth will be found of newer models of cam belt, whereas sharp teeth tend to imbue older belts.
Cam belts are constructed from rubber and will then be covered with materials like fibreglass so that they are stronger so that they will last longer.
Cam belts made recently tend to be made from resistant materials like HSN so that they are not damaged by high temperatures in engines.
Cam belts that are modern are much narrower in order to lessen their weight, to generate less friction.