Timing Belts in Hernehill

What does a cam belt do?

Cam belts are belts that are normally made of rubber that control the timing of a vehicle's engine valves. Valves in engines need to open and close a pre-agreed number of times and a timing belt ensures that this is allowed to happen.

A timing belt's teeth are purposefully designed so that they can perform efficiently for their intended engine. These teeth turn the cam shaft of the engine ad keep it in sync with the crankshaft.

The camshaft rotates at exact half the speed as the vehicle's crank shaft, and this is enabled by the timing belt. If this is stopped for any reason, then the engine will not function correctly which will surely result in severe damage to your engine.

Reasons for such damage can be things such as engine valves remaining open at the wrong time leading to them sticking to the pistons.

Jobs that Hernehill mechanics do on timing belts

If you wish to have jobs done on your vehicle's cam belt Hernehill mechanics will need to be located. You can do this by using RepairACar to find a mechanic in Hernehill to carry out work on your timing belt.

Any number of cam belt jobs can be carried out by our approved Hernehill mechanics. If you think that your cam belt may be broken they can undertake a cam belt inspection.

If it is that there is a problem with your cam belt it can be repaired by our timing belt experts in Hernehill, or if this is not possible undertake a timing belt replacement. Timing belts may need to be tightened from time to time, or you may have a timing belt that is too tight.

It could be that you need to have a realigning of your cam belt. Maybe your crankshaft and cam belt need to be synchronised, or your timing belt and vehicle water pump replaced simultaneously, you can locate Hernehill timing belt specialists when you visit RepairACar.

What happens when timing belt issues are ignored

If you fail to notice your cam belt is damaged, or even worse; failure to address the problem can have disastrous consequences for your car engine. Should you Honda vehicle have an interference engine not replacing a broken timing belt can result in damage to your car. If your timing belt snaps completely the car will not run, but should it be running whilst it is damaged it could be causing significant damage without your knowledge.

If your timing belt is damaged the pistons and valves in your engine will knock together which could cause your valve guides to crack. The valve guides in the engine of your vehicle may also bend which is also a costly procedure to fix. You might even end up suffering from a broken camshaft in extreme cases.

If you have a damaged timing belt you can visit RepairACar to find a registered cam belt mechanic in Hernehill.

Different types of timing belt

Timing belts can be obtained in a range of types and the sort that you will need will depend on your car.

A cam belt will be required in two types of engine.

Cam belts for interference engines require regular maintaining as a result of the level of proximity between the valves and pistons of the engine.

Cam belts for non-interference engines do not need such a high level of maintenance as the pistons and valves do not lie so close together.

Cam belt's teeth come in varying shapes as well.

Triangular toothed timing belts tend to be older, whereas recent models of cam belt tend to have teeth that are round.

Timing belts tend to be made from rubber which has been strengthened with materials such as Twaron, although manufacturers tend to make use of materials such as HSN nowadays.